
GRP for the Chemical Industry
GRP pipes and tanks for acids, alkalis and aggressive process media. Corrosion-resistant thanks to a 100% pure resin barrier layer, with materials selected using our corrosion resistance table.
GRP for the Chemical Industry: Corrosion-Resistant Pipes and Tanks for Aggressive Media
In the chemical industry, acids, alkalis and solvents attack materials, causing steel to corrode and conventional plastics to reach their limits. Fiberpipe GRP offers long-lasting resistance to these media thanks to a fibre-free, pure resin barrier layer, from sulphuric acid and sodium hydroxide solutions to salt solutions.
Contents
Benefits
1. Why Use GRP in the Chemical Industry?
The 100% pure resin layer in contact with the medium determines which substances a component can handle. We check every list of process media against our corrosion resistance table before specifying the resin system and laminate structure, ensuring safe and cost-effective operation.
Corrosion-Resistance
The pure resin layer reliably protects tanks and pipes against corrosion caused by acids, alkalis and other aggressive media.
Long Service Life
GRP does not corrode and retains its properties over many years, reducing maintenance requirements and plant downtime.
Application-Specific Design
We select the most suitable resin system for each medium, from vinyl ester and epoxy resins to thermoplastic linings for particularly aggressive substances.
Applications
2. Where Is GRP Used in Chemical Plants?
From storage to process piping, GRP covers the typical requirements of a chemical plant. Plant operators most frequently enquire about two areas.
Storage Tanks for Acids and Alkalis
LAU tanks for the storage, filling and handling of substances hazardous to water, manufactured in accordance with the applicable water protection requirements for these facilities.
Piping for Aggressive Media
Corrosion-resistant piping for acids, alkalis and process fluids, with suitable joining methods to create leak-tight, reliable systems.
Materials
3. Material Options for Your Process Media
The choice of resin depends on the medium, its concentration and the operating temperature. Vinyl ester and epoxy resins cover most chemical industry applications.
Vinyl Ester
Vinyl ester resin withstands temperatures of up to 90 °C and is suitable for applications with moderate thermal loads. It offers high chemical resistance to many media, has a Young’s modulus of approximately 20,000 N/mm² and withstands an internal pressure of 360 N/mm². This makes it an economical choice where corrosion resistance is the primary requirement.
Epoxy Resin
Epoxy resin withstands temperatures of up to 135 °C, making it suitable for high-temperature applications. It offers very high chemical resistance, even in particularly demanding media, also has a Young’s modulus of approximately 20,000 N/mm² and, thanks to its circumferential strength, is suitable for higher-pressure applications.
Manufacturing Process
4. How Are GRP Components for Chemical Applications Manufactured?
Tanks and pipes are manufactured using the filament winding process. By adjusting the winding angle, we control their strength and adapt the laminate structure to the pressure and structural requirements of your plant.
Filament Winding
The winding angles are adjusted to the pressure and structural requirements to achieve optimum strength.
Applications in Practice
5. Fiberpipe GRP in Use in the Chemical Industry
Our pipes and tanks are used in chemical plants and refineries, where corrosive media are stored, transported and processed. Their chemical resistance makes them a reliable choice.
-
Efficient Raw Gas Preheating for the RWE Coal Power Plant in Ibbenbüren
The RWE Ibbenbüren coal power plant, operational since 1985, required an efficient solution for reheating clean gas in the flue gas desulfurization system (FGD).
-
Efficient Wastewater Pipeline Rehabilitation for the Miro Refinery Oberrhein
Miro Refinery Oberrhein, Germany’s largest fuel refinery, planned the rehabilitation of its wastewater system. The existing pipelines needed replacement as they could no longer withstand the extreme stresses from temperature, pressure, and chemical corrosion.
Products
6. Which GRP Products Are Suitable for the Chemical Industry?
From storage tanks to process piping, we supply the right components for your application, tailored to your process medium and plant requirements.
Material Options
Epoxy, vinyl ester and polyester resins, selected according to the medium and operating temperature.
Tanks and Vessels
LAU, process and reaction tanks with diameters of up to 8,000 mm and capacities of up to 800 m³.
Piping Systems
Piping rated PN 10 and PN 16 in accordance with DIN 16965, with adhesive-bonded, laminated, push-fit and flanged joints.
Linings
Thermoplastic linings made of PVC or PVDF for particularly aggressive media.
Services
7. How Does Fiberpipe Support Chemical Plant Projects?
In addition to our products, we offer comprehensive services, from checking chemical compatibility to professional installation, to ensure your solution operates safely and reliably.
Consultation and Chemical Compatibility Assessment
We check your list of process media against our corrosion resistance table and specify the appropriate solution.
Design and Customisation
Tanks and pipes are precisely tailored to your process media and plant requirements.
Installation and Quality Assurance
Our team supports installation and ensures secure, leak-tight connections.
Training and Support
Training enables your staff to work with and maintain GRP components independently.
FAQ
8. Frequently Asked Questions About GRP in the Chemical Industry
Looking for Something Else?
We would be happy to advise you on a customised solution for your requirements.
Customer Testimonials
What Our Customers Say
“For over 20 years, Fiberpipe has been our reliable partner for GRP products. Always available, always open to innovation, and consistently friendly service.”
Klaus Grammlich
K + S Aktiengesellschaft
“For over 20 years, Fiberpipe has been a dependable partner for our water and wastewater treatment projects.”
Anke Eisemann, INVENT Umwelt- und Verfahrenstechnik
INVENT Umwelt- und Verfahrenstechnik
Industry Solutions
GRP Solutions for the Chemical Industry and Other Sectors
Our solutions are designed to meet the requirements of different industries. Whether you need chemical compatibility assessments, custom engineering or favourable terms for distributors, our experience helps us find the right solution for your needs.












